Check out our selection of components. When you've found
what you need, Contact Us so we can get started.

4 point roll bar –
consists of main hoop, rear seat x-member bar and rear back stays
$600

6 point roll bar –
consists of main hoop, rear seat x-member bar, rear back stays and door diagonals
$775

8 point roll bar –
consists of main hoop, rear seat x-member bar, rear back stays, door diagonals and lateral main hoop support bars
$900

10 point roll cage –
consists of main hoop, rear seat x-member bar, rear back stays, door diagonals, lateral main hoop support bars, a-pillars, upper windshield x-member and ¾ inch cage gussets
$1975

12 point roll cage –
consists of main hoop, rear seat x-member bar, rear back stays, door diagonals, lateral main hoop support bars, a-pillars, upper windshield x-member,¾ inch cage gussets and choice of X-bracing the door diagonal or front struts through firewall $2400

14 point roll cage –
consists of main hoop, rear seat x-member bar, rear back stays, door diagonals, lateral main hoop support bars, a-pillars, upper windshield x-member, ¾ inch cage gussets, x-bracing the door and front struts through the firewall
$2700

Custom bead seat –
consists of bead seat kit, custom fitted for driver to car (must have both driver and vehicle), gaffer taped and covered with NOMEX.
$1375

Bead seat kit for the do it yourselfer –
consists of materials to build bead seat, does not include tools such as vacuum pump or hot knife.
Small - $175
Medium - $275
Large - $325

Tube style fabricated 9” housing –
consists of .375” 4130 faceplate, .125” banjo, 3.250” .250” wall 4130 axle tubing, internal gussets and bulkheads (others charge extra for these), press in studs, filler cap, drain plug and vent.
36” $715
48” $765
60” $795
 

**Custom exact cut widths are available, offset pinion etc and complete housings available.  Ask for pricing.**

Dragster style fabricated 9” housing –
consists of .250” 4130 faceplate, .125” banjo, choice of forged housing ends, internal gussets and bulkheads (other charge extra for these), press in studs, filler cap, drain plug and vent.
21” $770
26” $825

**Custom sizes are available, as well as complete housings.  You have the choice of having us weld your housing ends on when the housing is finished, or sending them along with the housing.  We suggest you welding them on if we are building you a blank housing, because when you weld your brackets/tabs etc on, the housing is going to move, and there is a possibility of your ends not being 100%
in line with your axle CL.  Housing ends should be the last thing welded in place.**

**Prices are subject to change due to availability and vendor prices.  Also, this is simply a quote. If there is something above and beyond what the standard pricing calls for, then we reserve the right to change the quote. Also, anything installed outside the quote will be charged on a time and material type basis.**


Terms and Financing:
JBRC Inc. offers no warranty, Expressed or implied.  JBRC Inc. has a waiver of liability that needs to be signed before deposit is made. $1000 secures jig space as a deposit.  50% of quote is due before build will be started or parts ordered.
Remainder of balance is due before release of vehicle.

Joe Barszcz Race Craft, Inc.  ●  1300 East US Hwy 136, Suite I  ●  Pittsboro, IN 46167  ●  317.892.4054

www.jbracecraft.com 2008
Web Site by *Ray Productions*